Studio light, Visico VT flash - 400 P (400J) AC / DC
Product code: 1622
Manufacturer: Visico
Delivery methods:
-
Ex works
-
By a courier in Kiev
-
Delivery in Ukraine
(by courier services)
Payment methods
-
Cash
-
Privat24 payment
-
Visa / Mastercard
-
Cash on delivery
- About product
- Characteristics
- Equipment
Studio light Visico VT-400P (400J) is a light and compact flash made from high quality materials. With the ability to work from the network and from the battery. Suitable for equipment is not a large photo studio or can be used as additional light in large studios.
Due to the presence of a portable power supply with a battery. It is very convenient to use on field shooting.
Studio lighting Visico VT-400P has easy and convenient control, on the rear panel there is a display for setting and adjusting the flash output. The buttons adjust - flash on / off1, 2. pilot light (simulating) 3. light-emitting diode 4. flash signal 5 test. Any photographer will learn how to use this flash very quickly and without any problems. Studio light Visico VT-400P has a smooth power adjustment from full to 1/32 in steps of 1/10 steps. The recharge time and readiness for triggering is 0.8 to 2.3 seconds, the pulse duration is 1/800 at maximum power and 1/1200 at minimum power; in the bundle, there is a sync cable that is used to synchronize flashes, you can also use a radio synchronizer. Photo light is equipped with protection against overheating and voltage drop, as well as a socket for the installation of an umbrella, a pilot lamp 75W, a softbox attachment system - bayonet Bowens.
Power: 400J
Lead number (2 m, ISO 100): 70 (when using the reflector SF-610)
Bayonet: type Bowens
Power control range: 1 / 1-1 / 32 in steps of 1/10
Recharge time (220V): 0.8 ~ 2.3s
Pulse width: 1/800 ~ 1 / 1200s
Modeling lamp: 75W
Synchronization: Light Trap / Synchronous Cable 3.5mm / Test Button / Radio Synchronizer (not included)
Voltage on the sync connector: 5V
Color temperature: 5600 ° K (+/- 200 ° K)
Digital display: yes
Power supply: AC 190-240V (50Hz) / DC 12V (when using Visico CT-1000)
Dimensions: 20x12x12cm (without reflector)
Weight: 1.1kg
Weight of power supply - 1.52 kg
Voltage 12V
Capacity - 3600 Mah
The number of flash pulses is 250
The charging time of the power supply unit is 4 hours
Flash charging time from the power supply unit - 3,5sec
Dimensions of the power supply - 21h16h7sm
Flash Visico VT-400P - 1pc
Pilot lamp 75W - 1 piece
Network cable - 1 pc.
Synchroshnur - 1 piece
Power supply ST-1000 - 1 pc.